Service Test Group - Trane CVRC-M-1D Manual

84

Service Test Group

The Service Tests Group sequence is as follows:
Service Tools Group Password Request
Pswd Red to Access Service Tools Group
The Service Tools Password is
Successfully entering the password sends you to the Service Tools
Group Heading Screen.
The Service Tools Group contains items which are primarily associated
with either test or manual override of the chiller or chiller subsystems. If
the service tools password is entered the display goes to the menu
defined below. If a key is not pressed for 10 minutes or more in this
password protected menu the display returns to the Chiller Operating
Mode display of the Chiller Report and the password must be entered
again to return to this menu.
Service Tools Group Heading
Press <Next> <Previous> to Continue
This header is not suppressed when the headers are suppressed in the
Service Settings menu.
Chilled Water Pump
Chilled Water Pump:
Press < + > < - > to Change Setting
Possible values for status are: On, Factory default is Auto.
Chilled Water Flow Switch Status
The following screen is not a setpoint. This screen displays the status
of the chilled water flow switch status at the input to the UCM.
Chilled Water Flow Switch Status
Possible values for [Y] are:
Condenser Water Pump
Condenser Water Pump:
Press (+) (-) to Change Setting
Possible values for status are: On, Factory default is Auto.
Please Enter Password
-
- -
Service Tests & Overrides
[Y]
Open (No Flow).
Closed (Flow).
<Enter>.
[Status]
[Status]
CVRC-M-1D