Trane CVRC-M-1D Manual page 35

CVRC-M-1D
Report
Purge Alarm Message:
The following screen(s) shall be suppressed if the selected Purge
Control/Type is "Stand-Alone Purge".
Purge Alarm Msg:
Possible values for [status] are:
No Diagnostics Exist
Diagnostic Alarm
Purge Suction Temperature/Purge Liquid Temp.
The following screen shall be suppressed if the selected Purge
Control/Type is "Stand-Alone Purge".
Purge SuctionTemp:
Purge Liquid Temp:
Purge Pumpout Rate/Purge Max Pumpout Rate
The following screen shall be suppressed if the selected Purge Control
Purge is "Stand-Alone Purge".
Purge Pumpout Rate:
Purge Max Pumpout Rate:
Purge Total Pumpout Time/Purge Total Run Time
The following screen shall be suppressed if the selected Purge Control
Purge is "Stand-Alone Purge".
Purge Total Pumpout Time:
Purge Total Run Time:
Purge Adaptive Cycle Time w/Chiller On/Time to Purge
Remaining
The following screen shall be suppressed if the selected Purge Control
Purge is "Stand-Alone Purge".
Prge Adaptive Cycle Time w/Chlr On:
Time To Purge Remaining:
Purge Adaptive Cycle Time w/Chiller Off/Time to Purge
Remaining
The following screen shall be suppressed if the selected Purge Control
Purge is "Stand-Alone Purge".
Prge Adaptive Cycle Time w/Chlr Off:
Time To Purge Remaining:
[status]
[Help Message]
The [Help Message] is: Press <Next>
<Previous> to Continue
The [Help Message] is: Go to Diag,
Menu for Description/Reset
XXX.X F/C
XXX.X F/C
XXX.X Min/24 Hrs
XXX.X Min/24 Hrs
XX,XXX.X Min
XX,XXX.X Hrs
XXX.XHrs
XXX.XHrs
XXX.XHrs
XXX.XHrs
35