Time Of Day Setting - Trane CVRC-M-1D Manual

CVRC-M-1D
Operator Settings

Time of Day Setting

Current Time/Date
<Enter> to Change : <Next>To Continue
The top level "Current Time/Date" will be displayed when this screen is
first selected. Pressing the <Next > or <Previous > key will go to the next
or previous screen as usual.
If the <Enter> key is selected, five separate screens can be displayed
with which the time may be set. The "Current Time/Date" will be
displayed on line one of each of these screens. Each of these screens
will change one element of the current time/date. The second line of each
screen will indicate which element of the current time/data is being
changed as well as it's current value. The instructional messages which
are normally displayed on line two will not be present although the
instructions which would normally be displayed are still valid i.e., if the
setpoint has been changed, <Enter > or <Cancel > must be pressed to
continue.
If the first time changing screen is being displayed and the <Previous > key
is pressed, the top level for CVHE/CVHF/CVHGCurrent Time/Date"
screen will be displayed and the <Enter > key will have to be selected to
re-enter the time changing screens. If the fifth time changing screens is
being displayed and the <Next > key is pressed, the next screen will be
displayed. If <Previous > is selected at this point, the top level "Current
time/Date" screen will be displayed and the <Enter > key will have to be
selected to re-enter the time changing screens.
In order to change an element of the current time/date, select <Enter > from
the top level "Current Time/Date" screen to enter the time changing
screens. Hit <Next > or <Previous > to get to the proper screen. Press
the <+> <- > keys to change the element to its proper value and press
the <Enter> key to store the new time/date. A message "Updating Chiller
Clock. Please Wait" is displayed for two seconds after the <Enter> key is
pressed.
The five time changing screens are as follows:
Current Time/Date
To Change Hour:<+> <- > and<Enter>
Current Time/Date
To Change Minute: <
Current Time/Date
To Change Month: <+> <- > and <Enter >
Current Time/Date
To Change Day: <+> <- > and <Enter >
Current Time/Date
To Change Year:
HH: MM Xm Mon, XX XXXX
HH: MM Xm Mon, XX XXXX
HH: MM Xm Mon, XX XXXX
> <- > and <Enter >
HH: MM Xm Mon, XX XXXX
HH: MM Xm Mon, XX XXXX
HH: MM Xm Mon, XX XXXX
<+> <- > and <Enter>
43