Trane CVRC-M-1D Manual page 37

CVRC-M-1D
Report
If the PPM is out of range low or high "-Err" and "+++" respectively shall be
displayed. If the concentration has not been determined, or the refrigerant
monitor is in "Monitor Check" mode, " -" shall be displayed.
The following will be displayed if the channel scanner option is installed.
Last Rfgt Conc: Chanl 1
PPM [Rfgt Type] XXXX
If the PPM is out of range low or high "-Err" and "+++" respectively shall
be displayed . If a channel is inactive, " -" shall be displayed.
Refrigerant Monitor Case Temp:
Refrigerant Monitor Bench Temp:
The following will be displayed if the IPC Rfgt Monitor Auxililary Input
option is installed.
Refg Mon Auxiliary Input:
Press <Next> <Previous> To Continue
Approach Temperature
Evaporator Approach Temp:
Condenser Approach Temp:
Chanl 2 Chanl 3 Chanl 4
XXXX XXXX XXXX
XX.X .XF
XX.X .XF
XX.X ma
XX.X f/c
XX.X f/c
37