Trane CVRC-M-1D Manual page 79

CVRC-M-1D
Refrigerant Monitor Settings Group
Channel Scanner
This item shall be displayed only when the refrigerant monitor mode is
Warm-up.
Channel Scanner:
Press <+> <-> To Change Setting
Possible values of status are: Installed, Not Installed
Scanner Channel 1
This item shall be displayed only if the Channel Scanner is installed.
Scanner Channel 1:
Press <+> <-> To Change Setting
Possible values of status are: Active, Inactive
Scanner Channel 2
This item shall be displayed only if the Channel Scanner is installed.
Scanner Channel 2:
Press <+> <-> To Change Setting
Possible values of status are: Active, Inactive
Scanner Channel 3
This item shall be displayed only if the Channel Scanner is installed.
Scanner Channel 3:
Press <+> <-> To Change Setting
Possible values of status are: Active, Inactive
Scanner Channel 4
This item shall be displayed only if the Channel Scanner is installed.
Scanner Channel 4:
Press <+> <-> To Change Setting
Possible values of status are: Active, Inactive
Scanner Dwell Threshold
This item shall be displayed only if the Channel Scanner is installed.
Scanner Dwell Threshold:
Press <+> <-> To Change Setting
The Range of values for Scanner Dwell Threshold is 30 to 70 in
increments of 1.
[Status]
[Status]
[Status]
[Status]
[Status]
XX %
79