52
Basic Setups
Language Setting
Language:
Press <+> <- > to Change Setting
Possible language selections are: English (Factory Default), Francais,
Deutch, Espanol, Nippon (also known as Katakan, Use apanese
characters), Italiano, Nederlands,Portugese and Coded.
Possible Language Selections For the CCCLD are:
English, Traditional Chinese and Simplified Chinese.
Display Units
Display Units:
Press <+> <- > to Change Setting
Possible values of [type] are: SI (Metric), Factory Default is English.
Decimal Places Displayed Setpoint:
Decimal Places Displayed:
Press <+> <-> to Change Setting
Possible choices for [status] are: XXX, Factory Default is XXX.X.
Display Menu Headings Enable
Display Menu Headings:
Press <+> <- > to Change Setting
The factory default value is Enabled. If the setting is changed to disabled
the Menu Headings in each Menu or Group will be suppressed.
Differential to Start Setpoint
Differential to Start Setpoint:
Press <+> <-> to Change Setting
Range of values is 1 to 10 °F (0.5 to 5.5 °C) in increments of 1 or 0.1 °F
or °C depending on the Service Setup Screen XXX or XXX.X. Factory
default is 5 °F (2.8 °C).
XXXXXXXX
[type]
[status]
[d/e]
XXX.X F/C
CVRC-M-1D