Inspection; Installation - Yamaha VK10L Manual

1
2
1
103.5 mm 121.5 mm 121.5 mm
(4.07 in) (4.78 in) (4.78 in)
32.5 mm 42 mm 58.5 mm 58.5 mm
(1.28 in) (1.65 in) (2.30 in) (2.30 in)
125 mm
(4.92 in)
246.5 mm
(9.70 in)
a
a
2
1
FRONT AXLE AND TRACK
2
103.5 mm
(4.07 in)
39 mm 82.5 mm
(1.54 in) (3.25 in)
172 mm
(6.77 in)
87

INSPECTION

1. Inspect:
• Track 1
• Slide metal 2
Wear/cracks/damage → Replace.
2. Inspect:
• Sprocket wheel 1
Wear/break/damage → Replace.
• Front axle 2
Bends/scratches (excessive)/damage →
Replace.
3. Inspect:
• Bearing
Pitting/damage → Replace.

INSTALLATION

1. Install:
• Sprocket wheels
• Guide wheels
NOTE:
• When pressing the sprocket wheels onto the front
axle, align the lugs on each sprocket wheel.
• Position each sprocket wheel on the axle as
shown in the illustration.
2. Place the track in the chassis.
NOTE:
For track with a direction of rotation mark a:
Install the track with the mark pointing in the direc-
tion of track rotation.
3. Install:
• Bearing holder 1
NOTE:
Align the punch mark a on the bearing holder 1
with the rivet 2.
POWR
TR