Parameters For Command Translation Table; Configuration Examples For Address Translation - Emerson PACSystems RX3i User Manual

User Manual
GFK-2949E
5.7.2

Parameters for Command Translation Table

Parameter
mComreq_Setup [84]
mComreq_Setup [85]
mComreq_Setup [86]
mComreq_Setup [87]
mComreq_Setup [88]
mComreq_Setup [89]
mComreq_Setup [90]
mComreq_Setup [91]
mComreq_Setup [92]
5.7.3

Configuration Examples for Address Translation

Case 1:
Figure 15: COMMREQ Parameters & Corresponding Read/Write Permissives (Case 1)
•
•
Configuration of IEC-104 Server Parameter
Configuring Translation Memory Tables with two Different Offset Values and
CPO with a Non-Zero Value
Points > = CPO are configured for Read / Write operations.
Points < CPO are Configured for Read only.
Value Description
0 to 32000 Command Translation Table MSP
0 to 32000 Command Translation Table MDP
0 to 32000 Command Translation Table MST
0 to 32000 Command Translation Table MBO
0 to 32000 Command Translation Table MMENA
0 to 32000 Command Translation Table MMENB
0 to 32000 Command Translation Table MMENC
0 to 32000 Command Translation Table MEPTB
0 to 32000 Command Translation Table MEPTC
Chapter 5
Dec 2020
35