Packing List; Recommended Installation Procedure - FireplaceXtrordinair 4237 EG Installation Manual

Packing List

Included Hardware

Screen Box (shipped on front of fireplace, includes screen, trim, and optional tile stop)

Owner's Pack (ember chunks, rockwool)

Exhaust Restrictor

Remote Control

Horizontal Termination Shield
Additional Equipment Required

Log Set (Traditional Oak, Birch, or Bonfire)

Firebacks

Vent Pipe (installation specific)

Electrical Equipment (min. 14 gauge, grounded line)

LP Installations require GSR stepper motor (4-pack = 94400999, single = 250-01463)
Optional Equipment

Power Heat Duct kit (1 or 2)

CoolSmart TV Wall Kit

Trim
 Ironwork Doors
 Power Vent

Recommended Installation Procedure


Frame the opening for the fireplace. Make sure to allow for vent installation.

This fireplace is designed to accommodate 1/2" (13mm) drywall. Drywall may be mounted to the
side of the fireplace (standard) or flush with the facing (flush). See "Nailing Brackets" on page 13
for details). Secure the fireplace to the framing.

Install the vent, electrical, and gas line (convert to LP gas if applicable). We recommend you test
the operation of the fireplace at this point.

Install the drywall.

Install the hearth (if applicable).

Install the facing (if applicable).

Install the mantel (if applicable).

Install firebacks

Install logs

Finalize the installation (see page 36).
© Travis Industries
Installation
(for qualified installers only)
9/22/2021 - 1561
7
4237 EG