FireplaceXtrordinair 4237 EG Installation Manual page 39

1. Remove the trim and place it aside.
a) The side trim has a
small tab on the upper
edge. Use the tab to
lift the trim straight up.
When the hooks that
secure the trim to the
fireplace are free,
remove the trim from
the fireplace opening
and set it aside.
b) Lift the bottom trip
straight up. When the
trim is above the front
edge of the fireplace
opening, remove it
from the fireplace and
set it aside.
c) Tip the barrier screen
outward and remove
the screen.
d) The screen rests
against (2) tabs on the
upper sides of the
fireplace opening.
Slide the tabs behind
the front wall of the
fireplace to make
room for the removal
of the glass assembly.
© Travis Industries
Installation
(for qualified installers only)
9/22/2021 - 1561
39
4237 EG