FireplaceXtrordinair 4237 EG Installation Manual page 52

52
4. Remove and discard the (2) stock manifold Covers. Use a 1/4" nut driver to remove the screws that
secure the manifold covers to the burner tray (set the screws aside for securing the new manifold
covers in a later step).
5. Replace both burner orifices following the steps below.
6. Install the LP manifold covers supplied in the stove pack. Secure the manifold covers using the
screws removed in step 4.
© Travis Industries
Installation
9/22/2021 - 1561
(for qualified installers only)
NG
Front #2.5mm #53
Rear #32 #C51
LP
4237 EG