FireplaceXtrordinair 4237 EG Installation Manual page 46

46
7. Place log #4 as shown below. There are (2) notches on the bottom of the log that help orient the log
to the log grate. The charred end of the log should be to the left and be angled toward the center of
the burner. The cut end should rest slightly forward of the log grate between the (2) right fingers of
the log grate (see below). Make sure burner holes are not obstructed.
8. Place log #5 as shown below. There is a notch on the lower right of the log that rests against
the leftmost fireplace grate finger. The upper portion of the log rests on a flat spot on the top
of log #2.
© Travis Industries
Installation
Rests on front
of log grate
Rests on log
grate finger 2
from the right.
9/22/2021 - 1561
(for qualified installers only)
nd
4237 EG