50
14. Place log #9 as shown below. There is a hole on the thicker end of log #9 that rests on the left
locating pin on log #1 (see below). The thinner end of log #9 rests on the Ember-Glo™ glass
between the third and fourth log grate finger (see below). Work the end of the log into the glass until
it is stable.
15. Finish dressing the firebox with ember chunks over the top of the ember glass in front of the log set.
© Travis Industries
Installation
9/22/2021 - 1561
(for qualified installers only)
Log #1
4237 EG