Dimensions
Weight: 590 Lbs.
Cooling vents
have an external
diameter of 6"
1/2"
Stand-offs
41"
Optional Electrical
Conduit Exit Location
7-5/8"
3-1/4"
26"*
* Includes the
1/2" stand-offs
Packing List
Shipped with the Fireplace:
•
Installation Manual
•
Grate
•
Baffle
•
Blower Assembly
•
Ember Strip
•
Log Retainer (includes allen wrench & instructions)
•
Flex Duct w/ start collar – 3' Length, 6" Dia (For
Blower)
•
Two 10' Flex Ducts, 6" Diameter (For Cooling
Vents)
•
Two Vent Hoods (For Cooling Vents)
•
Two Vent Hood Storm Collars (For Cooling Vents)
Part # 17601184
36E - ZC Builder Booklet
TM
See "Chimney
Requirements"
4"
4"
1"
26-1/2"*
© 2001, Travis Industries, Inc.
11"
20-1/2"
4"
1-1/2" Wide Nail
Down Flange
42"*
6" Blower hook-ups are on both sides and on the bottom
(centered 7-5/8" from the rear edge). Remove the cover
plate to access the blower hook-up.
Shipped with the Faceplate:
•
Faceplate (two switch plate screws are
attached)
•
Switch Plate (includes blower rheostat)
•
10 Faceplate Screws
Shipped with the Door(s):
•
Owner's Manual
•
Installation Hardware Pack
•
Pair of Gloves
•
Efficiency and Registration Cards
•
Touch-up Paint
Electrical
Conduit
Location
36"
28"
24"
6-1/2"
The set-up face shipped on the
fireplace is 36-1/8" wide and
28-1/16" tall (dimensions
shown are for the finished face)
Printed 9/24/04
Page 2