FireplaceXtrordinair 4237 EG Installation Manual page 48

48
11. Detail the burner with Rock Wool (included with the fireplace). The included rock wool is
placed on top of the burner to provide a realistic ember glow from on the burner. The
Rockwool can be applied in a relatively thick layer. The best method for applying the
rock wool is to brush it onto the burner. Compress a clump of Rockwool between your
thumb and forefinger. Use a stiff brush to apply Rockwool fibers onto the burner. You will
not need to use the entire bag of Rockwool, save the remainder for future use.
12. Place log #7 as shown below. There is a hole on the charred end of the log that rests on a locating
pin on the right end of log #1(see below). The other end of log #7 rests on the right end of log# 3.
Rotate the lower portion of the log until it is in contact with the fireback.
© Travis Industries
Installation
9/22/2021 - 1561
(for qualified installers only)
4237 EG