Radio Shack ADV0801 Owner's Manual page 67

ADV0801 Owner's Manual Draft
AudioBoost
Hit Count
TSYS Menu Reference
The TSYS menu is used when creating new Trunking System objects, or editing existing
Trunking System objects. All menus are shown in the scanner's display as a three line window
that can be scrolled up or down to access the various different parameters. The active
parameter is always the middle parameter and is indicated by a flashing ":". The entire TSYS
menu is shown below:
TSYS Parameter
Type
Tag
Frequencies
1-200 x 100 mS
Sets the amount of time (in 100 millisecond intervals) for
the wait for reply delay if Delay is On, e.g., 20=2 seconds.
On or Off
Applies a 6 dB boost to audio levels when the object is
active
Numeric value
Increments each time a transmission is received on the
TGRP object. Global "Hit Counts" must be set to ON.
Press the Dflt softkey to reset to 0.
Options Description
MOT 800/900, MOT VHF/UHF, P25 MANUAL, P25 AUTO, EDACS STD,
EDACS NAROW, LTR
Sets the trunking system type. Choose MOT800/900 if the
system is a Motorola 800 or 900 MHz analog or digital
trunked radio system that uses the 3600 baud control
channel. Use P25 AUTO for most Project 25 systems that
send channel table information over the system control
channel. Use P25 MANUAL if it is necessary to manually
set the channel table information or if you wish to use the
default 800 MHz table data. Use EDACS STD for most
800 MHz EDACS systems using the 9600 BPS EDACS
control channel. Use EDACS NAROW for most 900 MHz
and some VHF/UHF EDACS systems using the 4800 BPS
EDACS control channel. Use LTR for Logic Trunked
Radio (LTR) systems.
Alpha-numeric text
The alphanumeric display name for the TSYS. Use the
standard text entry method or QTXT to name the object.
SEL
Press SEL to enter trunked radio system frequencies.
Enter control channel frequencies in any order for all
Motorola and Project 25 trunking systems. Enter system
Page 67