Radio Shack ADV0801 Owner's Manual page 50

ADV0801 Owner's Manual Draft
begin V-Scanner operations, press FUNC PGM. The scanner display will appear as follows:
add LCD illustration
Saving Main Memory To A V-Scanner Folder
To save the current contents of your scanner's main memory to a V-Scanner folder, press FUNC,
then PGM to enter V-Scanner mode, then press the Stor softkey. Use the ^ v keys on the 5-way
pushbutton pad to scroll to the desired V-Scanner folder, then press the Stor softkey.
If the selected V-Scanner folder already contains data, you will be asked if you wish to overwrite
the existing data with new data from your current version of main memory. Press the YES
softkey to proceed, or the NO softkey to cancel. If you decide the overwrite existing data, or if
the selected V-Scanner folder is already empty, the scanner will prompt you to enter a name for
the stored V-Scanner. The scanner uses the text from Line 4 of the Welcome Screen as a default
name if the folder is empty, or the current name if the folder contains data. You can provide your
own text here without overwriting the Line 4 Welcome Screen text. Use the standard text entry
method to type the name you wish to use, then press the OK softkey. The scanner will write the
contents of main memory to the V-Scanner folder. This will take approximately four seconds to
complete.
Loading A Stored V-Scanner Folder To Main Memory
To load the contents of a previously saved V-Scanner folder into your scanner's main memory,
press FUNC, then PGM to enter V-Scanner mode, then press the Load softkey. Use the ^ v keys
on the 5-way pushbutton pad to scroll to the desired V-Scanner folder, then press the Load
softkey. The scanner will ask you to confirm that you wish to overwrite the current contents of
main memory. Press the YES softkey to proceed, or the NO softkey to abort. The data transfer
takes approximately 4 seconds to complete.
Erasing V-Scanner Folders
You can erase V-Scanner folders when you no longer need them and wish to make the folder
storage location available for other data.
To erase the contents of a previously saved V-Scanner folder, press FUNC, then PGM to enter
V-Scanner mode, then press the Eras softkey. Use the ^ v keys on the 5-way pushbutton pad to
scroll to the desired V-Scanner folder, then press the Eras softkey. The scanner will ask you to
confirm that you wish to overwrite the current contents of the selected V-Scanner folder. Press
the YES softkey to proceed, or the NO softkey to abort.
Cloning Your Radio to Another ADV0801 or ADV0716 Scanner
Your ADV0801 features a high speed data interface that can be used to transfer the data from
your scanner to another ADV0801 or ADV0716 scanner.
Page 50