Radio Shack ADV0801 Owner's Manual page 69

ADV0801 Owner's Manual Draft
Threshold Hi
Threshold Lo
T Tables
Fleet Map
LMIT Menu Reference
The LMIT menu is used when creating new Limit Search objects, or editing existing Limit
Search objects. All menus are shown in the scanner's display as a three line window that can be
scrolled up or down to access the various different parameters. The active parameter is always
the middle parameter and is indicated by a flashing ":". The entire LMIT menu is shown below:
LMIT Parameter
Scan Lists
FrLO
and will search for new control channels when the
decoding quality of a control channel drops below
Threshold Lo, and, if no control channels are available that
meet the Threshold Hi criteria, the scanner will seek the
best control channel to use, and continue checking
periodically for a new control channel that meets the
Threshold Hi criteria. When Multi-Site=STAT, the scanner
will track the system using every usable control channel in
the control channel list.
1-99
Available When Multi-Site is set to ROAM. Sets the control
channel decode % threshold for a site to be considered
good when looking for a new site.
1-99
Available When Multi-Site is set to ROAM. Sets the control
channel decode % threshold for a site to be considered out
of range, which will begin the process of looking for a new
site.
Normal, Splinter, Custom
For Motorola and P25 systems only - sets custom channel
tables. Use < >, to select option, press SEL on Custom to
enter custom table information
SEL
For Motorola Type I systems only - sets fleet map
Options Description
On or Off for Scan Lists 1-20
Sets membership in Scan Lists. Use < > keys to scroll
through Scan Lists. Use SEL key to toggle Scan List
membership. A "*" next to the Scan List number indicates
that the object is mapped to that Scan List.
Any supported frequency in MHz
A frequency that will be used as the lower limit for the
limit search range
Page 69