Radio Shack ADV0801 Owner's Manual page 65

ADV0801 Owner's Manual Draft
AudioBoost
Hit Count
TGRP Menu Reference
The TGRP menu is used when creating new Trunking Talkgroup objects, or editing existing
Trunking Talkgroup objects. All menus are shown in the scanner's display as a three line
window that can be scrolled up or down to access the various different parameters. The active
parameter is always the middle parameter and is indicated by a flashing ":". The entire TGRP
menu is shown below:
TGRP Parameter
Scan Lists
TSYS
ID
Type
Tag
L/Out
On or Off
Applies a 6 dB boost to audio levels when the object is
active
Numeric value
Increments each time a transmission is received on the
CONV object. Global "Hit Counts" must be set to ON.
Press the Dflt softkey to reset to 0.
Options Description
On or Off for Scan Lists 1-20
Sets membership in Scan Lists. Use < > keys to scroll
through Scan Lists. Use SEL key to toggle Scan List
membership. A "*" next to the Scan List number indicates
that the object is mapped to that Scan List.
New or previously stored trunking system object (TSYS)
To enter a new trunking system, use the < > keys to scroll
through the stored systems until NEW appears, then
press SEL to enter the parameters for the new TSYS. To
use a trunking system that you have previously entered,
use the < > keys to scroll to the desired system.
Decimal, hex or AFS depending on TSYS type
The digital address of the talkgroup or individual radio ID
on the trunked radio system.
Group or Private
Use Group for talkgroup ID, Private for individual radio
ID.
Alpha-numeric text
The alphanumeric display name for the TGRP. Use the
standard text entry method or QTXT to name the object.
On or Off
Permanent lockout for the TGRP. Also accessed by pressing
Page 65