Radio Shack ADV0801 Owner's Manual page 66

ADV0801 Owner's Manual Draft
Priority
LED Mode
LED Color
Latch LED
Backlight
Alarm
Fav
Skywarn
EXPERT BELOW
Delay
Delay Time
FUNC L/OUT while the scanner is stopped on the TGRP
object.
On or Off
Turns Priority Mode on or off for the TGRP object.
Solid or Flash
Controls whether the ALERT LED flashes or remains on
solid when the ALERT LED is used.
0-7
Sets LED color to 0-7 as defined in the GLOB menu. By
default, 0=LED Off, 1=Red, 2=Yellow, 3=Green, 4=Cyan,
5=Blue, 6=Magenta, 7=White.
On or Off
Normally the ALERT LED is active only while the object is
receiving a transmission. When Latch is on, the ALERT
LED will remain lit after the transmission is complete,
unless overridden by a subsequent object that is also
using the ALERT LED.
On, Off or Flash
Controls whether the backlight should be on, off or
flashing while the object is active.
None, Chirp, Hi-Lo, Alert, Ring, 2-Chirp, Fast Hi-Lo, DTMF#
Sets the Audible Alarm for the TGRP object. When an
Audible Alarm is selected, the selected alarm will play at
the beginning of each transmission on the TGRP object, or
anytime the scanner stops for activity on the TGRP object
while scanning.
On or Off
When On, the TGRP object is a member of the Favorites
Scan List.
On or Off
When On, the CONV object is a member of the Skywarn
Scan List.
On or Off
Controls whether a Delay is used to wait for reply traffic
after a transmission on the TGRP.
Page 66