Radio Shack ADV0801 Owner's Manual page 70

ADV0801 Owner's Manual Draft
FrHi
Tag
L/Out
LED Mode
LED Color
Latch LED
Backlight
Alarm
Fav
EXPERT BELOW
Modulation
Any supported frequency in MHz
A frequency that will be used as the upper limit for the
limit search range
Alpha-numeric text
The alphanumeric display name for the LMIT search. Use
the standard text entry method or QTXT to name the
object.
On or Off
Permanent lockout for the LMIT channel. Also accessed by
pressing FUNC L/OUT while the scanner is stopped on
the LMIT object.
Solid or Flash
Controls whether the ALERT LED flashes or remains on
solid when the ALERT LED is used.
0-7
Sets LED color to 0-7 as defined in the GLOB menu. By
default, 0=LED Off, 1=Red, 2=Yellow, 3=Green, 4=Cyan,
5=Blue, 6=Magenta, 7=White.
On or Off
Normally the ALERT LED is active only while the object is
receiving a transmission. When Latch is on, the ALERT
LED will remain lit after the transmission is complete,
unless overridden by a subsequent object that is also using
the ALERT LED.
On, Off or Flash
Controls whether the backlight should be on, off or
flashing while the object is active.
None, Chirp, Hi-Lo, Alert, Ring, 2-Chirp, Fast Hi-Lo, DTMF#
Sets the Audible Alarm for the LMIT object. When an
Audible Alarm is selected, the selected alarm will play
anytime the scanner stops for activity on the LMIT object
while scanning.
On or Off
When On, the LMIT object is a member of the Favorites
Scan List.
Page 70