Radio Shack ADV0801 Owner's Manual page 59

ADV0801 Owner's Manual Draft
Key Beeps
Light Mode
Light Area
Light Secs
Battery
Lo Batt Alert
Battery Info
Charge Time
Atten Mode
Key or Stlth
Controls all radio beeps.
On or Off
Controls key beeps.
Norml, Key, Ignre, On, Stlth
Controls the backlight operation. Norml (Normal) uses the
backlight key on the keypad. Key activates the backlight
when any key is pressed. Ignore activates the backlight
when a key is pressed, and that key's normal function is
ignored if the backlight is off when it is pressed. On
causes the backlight to remain on all the time. Stlth
(Steath) disables the backlight.
Both, LCD, Keybd
Controls what area is illuminated when the backlight is on.
Both illuminates the LCD and the keypad, LCD
illuminates
illuminates the keypad only.
1-99 seconds
Controls the amount of time the backlight remains on for
Normal, Key and Ignore light modes Battery NiMH,
Loads low battery profile for each different battery type.
Alkaline or NiCad
Loads low battery profile for each different battery type
0-60 seconds
Controls critical battery audible alert. 0=off.
SEL
Displays current battery voltage, DAC value and charge
time remaining if battery is charging.
0-99
Battery charge time in hours. 0=charger off. The battery
charger is timer based and charges at a current rate of
150 mA. The charger is disabled when BATTERY is set to
Alkaline. A default charge time of 9 hours is used for
NiCAD batteries, and 16 hours for NiMH batteries.
Global or Normal
The attenuator reduces the amount of signal at the
receiver input. This helps reduce interference from strong
nearby transmitters. Global attenuator mode applies
attenuation radio-wide, regardless of individual object
Page 59
the display only. Keybd (Keyboard)