Related Manuals for Radio Shack 20-405
Summary of Contents for Radio Shack 20-405
- Page 1 20-405 / PRO-405 User’s Guide Desktop Radio Scanner Thank you for purchasing your Desktop Radio Scanner from RadioShack. Please read this user’s guide before installing, setting up, and using your new scanner...
-
Page 2: Table Of Contents
Contents Package Contents ....................4 Features ......................4 Understanding Your Scanner ..................6 Channel Storage Banks ..................... 6 Service Banks ......................6 Preprogrammed Service Bank Frequencies ..............7 Marine ........................7 Fire/Police ......................... 8 Aircraft ........................9 Ham Amateur Radio ....................9 FM Broadcast ...................... - Page 3 Receiving Alerts for Specific Areas ................. 21 Testing the Weather Alert and Beep Tone .............. 22 Skywarn ........................22 Setting Delay ....................... 23 Locking Out Channels and Frequencies ..............23 Reviewing and Removing Lock-outs ............... 24 Using Priority ....................... 25 Turning the Key Tone On and Off ................
-
Page 4: Package Contents
Package Contents • Scanner • Antenna • AC Adapter • User’s Guide • Quick Start Guide Features Your new PRO-405 Desktop Scanner lets you scan conventional transmissions and is preprogrammed with search banks of the most common frequencies used by public service agencies. Service Banks are accessed by pressing a one- touch search key—no complicated programming required. Your new scanner gives you direct access to over 26,000 frequencies, including those used by police and fire departments, FM broadcast, ambulance services, aircraft, and amateur radio services. Your PRO-405 scanner also has these special features: Service Banks – easily locate types of calls by searching preprogrammed frequencies in separate marine, fire/police, aircraft, ham, FM broadcast, and weather banks. Display Backlight – makes the display easy to read in low-light situations. Lock-out Function – skip over specified channels or frequencies when scanning or searching. Ten Channel-Storage Banks – group and store 20 channels in each bank (200 total channels). - Page 5 Data Cloning – transfer the programmed data to another PRO-405 scanner. Real-time Signal Strength Indicator – shows relative strength of received signals. Liquid-Crystal Display (LCD) – easy to view and change programming information. Telescopic Antenna – provides good reception of strong local signals. You can also connect an external antenna for improved reception of distant or weak signals. Your PRO-405 scanner can receive these bands: Frequency Range Types of Transmissions 29–54 MHz 10-Meter Ham, VHF Lo, 6-Meter Ham 87.3–107.9 MHz FM Broadcast 108–136.99166 MHz Aircraft 137–174 MHz Military Land Mobile, 2-Meter Ham, VHF Hi 380–512 MHz...
-
Page 6: Understanding Your Scanner
Understanding Your Scanner Once you understand a few simple terms used in this manual and familiarize yourself with your scanner’s features, you can put the scanner to work for you. Simply determine the type of communications you want to receive, then set the scanner to scan them. A frequency is the receiving signal location (expressed in kHz or MHz). To find active frequencies, use the search function or consult an online resource such as www.radioreference.com. When you find a frequency, you can store it into a programmable memory location called a channel, which is grouped with other channels in a channel- storage bank. You can then scan the channel-storage banks to see if there is activity on the frequencies stored there. Each time the scanner finds an active frequency, it stays on that channel until the transmission ends. Channel Storage Banks To make it easier to identify and select the channels you want to listen to, your scanner divides the channels into 10 banks (1 to 10) with 20 channels each, for a total of 200 channels. You can use each channel-storage bank to group frequencies, such as those used by the police department, fire department, ambulance services, or aircraft. For example, you could program the frequencies used by your local police department starting with Channel 1 (the first channel in bank 1) and program the fire department frequencies starting with Channel 21 (the first channel in bank 2). Service Banks The scanner is preprogrammed with the frequencies allocated to marine, fire/ police, aircraft, ham radio, FM broadcast and weather services. This is handy for quickly finding active frequencies instead of searching through an entire bank (see “Service Bank Search” on page 17). -
Page 7: Preprogrammed Service Bank Frequencies
Preprogrammed Service Bank Frequencies Marine Channel Frequency (MHz) Channel Frequency (MHz) 156.0500 156.1750 156.2500 156.2250 / 160.8250 156.3000 156.2750 156.3500 156.3250 156.4000 156.3750 156.4500 156.4250 156.5000 156.4750 156.5500 156.5250 156.6000 156.5750 156.6500 156.6250 156.7000 156.6750 156.7500 156.7250 156.8000 156.8750 156.8500 156.9250 156.9000 156.9750 156.9500 157.0250... -
Page 8: Fire/Police
Fire/Police Group Frequency Range (MHz) Step (kHz) 33.420-33.980 37.020-37.420 39.020-39.980 42.020-42.940 44.620-45.860 45.880 45.900-46.060 46.080-46.500 153.770-154.130 154.145-154.445 154.650-154.950 155.010-155.370 155.415-155.700 155.730-156.210 158.730-159.210 166.250 170.150 453.0375-453.9625 12.5 458.0375-458.9625 12.5 460.0125-460.6375 12.5 465.0125-465.6375 12.5... -
Page 9: Aircraft
Aircraft Group Frequency Range (MHz) Step (kHz) 108.000-118.000 8.33 118.00833-136.99166 8.33 Ham Amateur Radio Group Frequency Range (MHz) Step (kHz) 29.000-29.700 50.000-54.000 144.000-148.000 420.000-450.000 12.5 FM Broadcast Frequency Range (MHz) Step (kHz) 87.3–107.9 Weather Channels Channel Frequency (MHz) 162.400 162.425 162.450 162.475 162.500... -
Page 10: Understanding The Keypad
Understanding the Keypad POWER MAR (Marine) Turn scanner on and off. Search the preprogrammed marine bank. VOLUME FD/PD (Fire Dept/Police Dept) Adjust volume. Search the preprogrammed fire/police bank. SQUELCH (Weather / Skywarn) - Turn counterclockwise - Search the seven preprogrammed weather to listen to a weak or channels. distant station. - Press and hold to jump to the Skywarn - Turn clockwise channel (channel 200). You must first to cut out weak program your local Skywarn frequency into transmissions. channel 200 (see page 22). Search the preprogrammed amateur radio bank. AIR (Aircraft) Search the preprogrammed aircraft bank. FM Broadcast Search FM radio stations. - Page 11 0–9 - Input a number when entering frequencies and selecting banks (0 selects bank 10). - The number range above the keys (1–20, 21–40, 41-60, etc.) indicates the channels stored in that bank. SCAN / MAN (Manual) • / DELAY - Enter Scan mode to scan - Input a decimal point when programmed channels. entering frequencies. - Enter Manual mode to stop - Program a two-second scanning, directly enter a delay for the selected channel number, or monitor a channel. single channel. ENT (Enter) Complete the entry of Select the direction for frequencies. searching and scanning. L/O RVW PRI / ALERT - Lock-out selected channels - Enable and disable the or frequencies.
-
Page 12: Understanding The Display
Understanding the Display Row 1 Row 2 Row 3 Row 1 – Skywarn channel active. FD/PD – Searching the fire/police bank. BANK – Appears with numbers (1–10) to indicate the scan bank. The bar under the bank number shows banks that are turned on for scanning. AIR – Searching the aircraft bank. HAM – Searching the amateur radio bank. Row 2 WX – Searching weather channels. FM radio – Searching for FM radio stations. 000 – Channel number the scanner is tuned to. CH – Appears with channel number (1–200) or P (priority channel). – Frequency the scanner is tuned to. 000.000 MAR – Searching the marine bank. -
Page 13: Additional Display Messages
Additional Display Messages ALL CH L-out – All channels locked out during scan or marine band search. b X Ch-FULL – All displayed bank channels are full. b X StorE – Frequency programmed into displayed bank’s channel. CLOnE – Clone mode. -dUPL- – Frequency is already stored in another channel. Error – Entry error. FLo ALL- CL – All the locked-out frequencies removed during a FD/PD, AIRCRAFT, or HAM bank search. L-r – Review the locked-out frequencies. L-O Fr-FULL – Maximum of 50 frequencies already locked out. oFF tonE – Key tone deactivated. On tonE – Key tone activated. P – Scanner is tuned to the priority channel. -t- – Tune mode. Sub Bank Messages Lo VHF – Sub-bank 1 of the fire/police bank. Hi VHF – Sub-bank 2 of the fire/police bank. UHF – Sub-bank 3 of the fire/police bank. -
Page 14: Setup
Setup Powering Your Scanner You can power your scanner using with AC power using the supplied AC adapter or from your vehicle using an optional DC adapter (not supplied). AC Power 1. Connect the supplied adapter to the scanner’s DC 9V jack. 2. Plug the adapter into a standard household power socket. . To disconnect, unplug the adapter from the power source first. Caution: To avoid injury, do not connect the adapter to a ceiling outlet. Vehicle Power 1. Connect a 9V, 400mA DC CLA adapter (not supplied), to the scanner’s DC 9V jack. 2. Plug the adapter into your vehicle’s power port. . To disconnect, unplug the adapter from the power source first. Notes: • If the scanner does not work properly after connecting it to power, try resetting it (see “Initializing the Scanner”... -
Page 15: Connecting The Antenna
Connecting the Antenna To attach the supplied telescopic antenna: 1. Insert the antenna in the hole on the top of the scanner. 2. Turn the antenna clockwise to tighten. Connecting an Outdoor Antenna To connect an external antenna, follow the installation instructions supplied with the antenna. Use 50-ohm coaxial cable to connect your scanner to the outdoor antenna. For lengths between 50 and 100 feet, use RG-8X low-loss dielectric coaxial cable. For lengths over 100 feet, use RG8. You also may need a BNC adapter (available at your local RadioShack store). Warning: Use extreme caution when installing or removing an outdoor antenna. If the antenna starts to fall, let it go! It could contact overhead power lines. -
Page 16: Basic Operation
Basic Operation Turning on the Scanner and Setting Squelch 1. Turn SQUELCH counterclockwise until the indicator points to MIN before you turn on the scanner. 2. Slide POWER to ON. A welcome message appears. After about 3 seconds, you might hear a hissing sound. Adjust VOLUME to a comfortable listening level. . Turn SQUELCH clockwise, just until the hissing sound stops. To perform a quick check of scanner operation, press . If you are near a NOAA weather station, you should hear weather information. Notes: • Make sure the scanner’s antenna is connected before you turn it on. • To listen to a weak or distant station, turn SQUELCH counterclockwise. •... -
Page 17: Searching For Active Frequencies
If you do not have a list of frequencies in your area, use a Tune search or a Service Bank search to find transmissions. Or refer to an online resource such as www.radioreference.com. Searching for Active Frequencies Tune Search During a tune search, the scanner tunes up or down starting from a frequency you specify. 1. Press TUNE. The display alternates between PSE and –t–. 2. If you want to change the starting frequency, enter a new frequency and press ENT. . Press PSE to start tune search. –t– appears on the display. 4. To change the tuning direction, press e or d. Notes: • Press •/Delay to turn the two-second delay feature on and off. • Press PSE to pause searching. Press PSE again to resume. Service Bank Search Your scanner contains groups of preset frequencies called Service Banks. You can search for marine, fire/police, aircraft, ham, FM, and weather transmissions... -
Page 18: Storing Found Frequencies Into Channels
Storing Found Frequencies into Channels Once you find interesting frequencies during a Tune or Service Bank search, you can store them in the scanner’s channel-storage banks. 1. Press ENT when you find a frequency. The bank number and StorE appear. 2. If you want to change banks, enter the new bank number. . Press ENT to store the frequency. The channel and frequency flash twice. To cancel the operation, press TUNE/CLEAR. Notes: • The frequency is automatically stored in the first empty channel of the selected bank. • If the scanner displays -dUPL-, the frequency is already stored in another channel. -
Page 19: Turning Channel-Storage Banks On And Off
Turning Channel-Storage Banks On and Off To turn a channel-storage bank on or off, press the bank’s number key (1–0, using 0 for bank 10) during scanning. The channel-storage banks are on when they have a bar underneath them and off when no bar appears underneath them. Notes: • The scanner does not scan any of the channels within the banks you have turned off. • You cannot turn off all banks; there must be at least one active bank. •... -
Page 20: Listening To The Marine Bank
Listening to the Marine Bank 1. Press to search the marine bank. MAr appears for about two seconds, then the scanner starts searching from marine channel 16. To change the search direction, press e or d. 2. Press PSE to stop searching. SRCH disappears and MAN appears. • To change the channel manually, press e or d. • To select a channel directly, enter the two-digit channel number. See “Marine Service Bank” on page 7 for a list of channels. • To lock-out a frequency, press L/O. . Press PSE again to restart the marine bank search. Weather Features The FCC (Federal Communications Commission) has allocated channels for use by the National Oceanic and Atmospheric Administration (NOAA). Regulatory agencies in other countries have also allocated channels for use by their weather reporting agencies. The NOAA and your local weather reporting agency broadcast the local forecast and regional weather information on one or more of these channels. Listening to a Weather Channel Press to hear your local forecast and regional weather information. WEAthEr appears for about two seconds, then the scanner starts searching the weather bank. -
Page 21: Weather Alerts
Weather Alerts Receiving All Weather Alerts To program the scanner to search for weather alerts every two seconds, set a weather channel as the priority channel. 1. Press . 2. Select the weather channel you want to set as the priority channel. . Press and hold ENT then PRI/ALERT. P ChAnnEL displays momentarily. Then P flashes and 000.000 (or the previously-stored frequency) appears. 4. Press ENT to store the priority channel. The display flashes twice. Press TUNE/CLEAR to cancel. 5. Press PRI/ALERT during scanning or searching to turn on the priority feature. PRI appears. If the scanner detects a 1050 Hz weather alert tone on the programmed channel, the scanner sounds the alert tone and ALErt flashes. Press any key to turn off the alarm. Receiving Alerts for Specific Areas About SAME Signals The National Weather Service precedes each weather alert with a digitally encoded SAME (Specific Area Message Encoding) signal, then a 1050 Hz tone. The SAME signal includes a FIPS (Federal Information Processing Standard) code and an event code that corresponds with the type of alert being sent. The FIPS code format is: Subdivisions State... -
Page 22: Testing The Weather Alert And Beep Tone
. Use e or d to select the desired FIPS code storage location. 4. Use the number keys to enter the FIPS code, then press ENT to store the code. 5. Repeat steps 3-4 for all the FIPS codes that you wish to store. . Press to exit FIPS code entry mode. The scanner displays F showing that FIPS codes are enabled. . Press PRI/ALERT to initiate SAME Standby mode. The scanner displays F [1-7] StAndby. The scanner will monitor weather channels for alerts with matching FIPS codes. To exit SAME Standby mode, press PRI/ALERT again. Notes: • Press L/O during step 4 to lock-out FIPS entries; appears in the display. Press L/O again to enable FIPS entries; disappears. -
Page 23: Setting Delay
2. To activate Skywarn, press and hold for about two seconds. . The scanner jumps to channel 200 and displays Note: • If no frequency is programmed in the Skywarn channel, No ProG appears. • Refer to www.radioreference.com to find Skywarn frequencies in your area. Setting Delay To avoid missing a reply in conversations, a two-second delay is automatically set for each channel. The scanner stops for two seconds after a transmission ends before it resumes scanning or searching. DLY appears on the display when the delay function is active. To turn delay on: • If the scanner is scanning and stops on an active channel, quickly press •/DELAY before it resumes. -
Page 24: Reviewing And Removing Lock-Outs
Reviewing and Removing Lock-outs Stored Channels 1. Hold down L/O L/O RV W for about two seconds while in manual operation. The scanner pulls up a list of locked out channels. 2. Repeatedly press and hold L/O L/O RV W to show the next locked out channel. If an error beep sounds, there are no locked out channels. . To remove the lock-out, press L/O L/O RV W until disappears. Marine Service Bank 1. Press PSE during the Marine Service Bank search. 2. Hold down L/O L/O RV W for about two seconds. The scanner pulls up a list of locked out channels. . Repeatedly press and hold L/O L/O RV W to show the next locked out channel. If an error beep sounds, there are no locked out channels. -
Page 25: Using Priority
Using Priority The priority feature sets the scanner to check one channel every two seconds while scanning. You can program one frequency into the priority channel. 1. Press PGM, then press PRI/ALERT. PCH and 000.000 (or the previously stored frequency) appear. 2. Enter the frequency you want stored in the priority channel, then press ENT. . To turn on the priority feature, press PRI/ALERT during scanning or searching. PRI appears. The scanner checks the priority channel every two seconds and stays on the channel if there is activity. • To turn off the priority feature, press PRI/ALERT. PRI disappears. • To program a weather channel as the priority channel, see “Receiving All Weather Alerts“ on page 21. Turning the Key Tone On and Off The scanner is preset to sound a tone each time you press one of its keys. To turn the key tone on and off: 1. If the scanner is on, turn it off then back on again. 2. WELCOME SCAnnInG rECEIVEr appears. -
Page 26: Programming With A Personal Computer
Programming with a Personal Computer You can upload or download programmed data to or from a PC using a USB cable available from your local RadioShack store or www.RadioShack.com. The application software is available online. Use a search engine to find “scanner programming software.” Follow instructions in the software package to upload and download data. Initializing the Scanner If the scanner’s display locks up or does not work properly after you connect a power source, you might need to initialize the scanner. Important: This procedure clears all information you stored in the scanner’s memory. Only initialize the scanner when you are sure the scanner is not working properly. 1. Turn off the scanner, then turn it on again. WELCOME SCAnnInG rECEIVEr appears. -
Page 27: Preprogrammed Frequency Banks
Preprogrammed Frequency Banks Bank 1 BANK 2 Frequency Frequency Channel Channel (MHz) (MHz) 40.5000 151.6250 151.8200 52.5250 121.5000 151.8800 122.0000 151.9400 122.2000 151.9550 122.7000 154.0100 122.7500 154.0700 122.8000 154.1300 122.9000 154.1450 122.9500 154.1600 154.1750 123.0000 123.1000 154.1900 123.4500 154.2050 131.4500 154.2200 131.6750 154.2350... - Page 28 Bank 3 BANK 4 Frequency Frequency Channel Channel (MHz) (MHz) 154.3250 155.3400 154.3400 155.3550 154.3550 155.3700 154.3700 155.3850 154.3850 155.4000 154.4000 155.4750 154.4150 156.4250 154.4300 156.4500 154.4450 156.4750 154.5700 156.5750 154.6000 156.6250 155.1600 156.8000 155.1750 156.9250 155.2050 157.0500 155.2200 157.1000 155.2350 157.1250 155.2650...
- Page 29 BANK 6 BANK 5 Frequency Frequency Channel Channel (MHz) (MHz) 415.7000 460.4250 446.0000 460.4500 450.8000 460.4750 454.0000 460.5000 460.0250 460.5250 460.0500 460.5500 460.0750 460.5750 460.1000 460.6000 460.1250 460.6250 460.1500 460.6500 460.1750 460.7000 460.2000 460.7500 460.2250 460.8000 460.2500 460.8500 460.2750 460.9000 460.3000 460.9250 460.3250...
- Page 30 BANK 7 BANK 8 Frequency Frequency Channel Channel (MHz) (MHz) 462.5750 467.5875 462.5875 467.6125 462.6000 467.6375 462.6125 467.6625 462.6250 467.6875 462.6375 467.7125 462.6500 467.7625 462.6625 467.8125 462.6750 467.8500 462.6875 467.8750 462.7000 467.9000 462.7125 469.5000 462.7250 469.5500 462.9500 462.9750 464.5000 464.5500 464.8750 467.0625 467.5625...
-
Page 31: Additional Information
Additional Information Troubleshooting The scanner is not working at all. • The AC or DC adapter might not be connected. Be sure the adapter’s barrel plug is fully inserted into the DC 9V jack. The center tip of the adapter’s barrel plug must be set to positive. The scanner does not receive any stations or reception is poor. • An antenna is not connected or is connected incorrectly. Be sure an antenna is properly connected to the scanner. • Reception may be blocked by walls or other obstructions. Try moving to a different area. The scanner is on but does not scan. • The squelch might not be adjusted correctly. Turn SQUELCH clockwise. • Only one channel or no channels are stored. Store frequencies into more than one channel. -
Page 32: Scanning Legally
Scanning Legally Your scanner covers frequencies used by many different groups including police and fire departments, ambulance services, government agencies, private companies, amateur radio services, military operations, pager services, and wireline (telephone and telegraph) service providers. It is legal to listen to almost every transmission your scanner can receive. However, there are some transmissions you should never intentionally listen to. These include: • Telephone conversations (cellular, cordless, or other private means of telephone signal transmission) • Pager transmissions • Any scrambled or encrypted transmissions According to the Electronic Communications Privacy Act (ECPA), as amended, you are subject to fines and possible imprisonment for intentionally listening to, using, or divulging the contents of such a transmission unless you have the consent of a party to the communication (unless such activity is otherwise illegal). This scanner is designed to prevent reception of illegal transmissions, in compliance with the law which requires that scanners be manufactured in such a way as to not be easily modifiable to pick up those transmissions. Do not open your scanner’s case to make any modifications that could allow it to pick up transmissions that are not legal to listen to. Doing so could subject you to legal penalties. In some areas, mobile use of this scanner is unlawful or requires a permit. Check the laws in your area. We encourage responsible, legal scanner use. Care Your scanner is not waterproof. Do not expose it to rain, moisture, or extremely high humidity. If the scanner gets wet, wipe it dry immediately. Use and store the scanner only in normal temperature environments. Handle the scanner carefully; do not drop it. Keep the scanner away from dust and dirt, and wipe it with a damp cloth occasionally to keep it looking new. Specifications Frequency Coverage 29-54 MHz ..................(5 kHz steps)/FM 87.3-107.9 MHz ..............(100 kHz steps)/WFM 108-136.99166 MHz .............. - Page 33 148.0125-150.7875 MHz ............(12.5 kHz steps)/FM 150.8-161.995 MHz ................ (5 kHz steps)/FM 162-174 MHz ................(12.5 kHz steps)/FM 380-512 MHz ................(12.5 kHz steps)/FM Sensitivity (S+N)/N 20 dB 29-54 MHz ......................0.5 uV 87.3-107.9 MHz ((S+N)/N 30 dB) ..............1.0 uV 108-136.99166 MHz ..................1.0 uV 137-174 MHz ....................0.5 uV 380-512 MHz ....................0.7 uV Spurious Rejection (FM @154 MHz) ..............50 dB Selectivity ±8 kHz/±17kHz (FM/AM) ............... -6dB/-50dB ±80kHz/±180kHz (WFM) ................ -6dB/-50dB Search Speed ................Up to 80 Steps/Sec Scan Speed ................Up to 40 Channels/Sec Delay Time ....................2 Seconds IF Frequencies 1st IF ......................10.7 MHz 2nd IF .
-
Page 34: Service And Repair
Service and Repair If your scanner is not performing as it should, take it to your local RadioShack store for assistance. To locate your nearest RadioShack, use the store locator feature on RadioShack’s website (www.radioshack.com), or call 1-800-The Shack (800-843-7422) and follow the menu options. Modifying or tampering with the scanner’s internal components can cause a malfunction and might invalidate its warranty and void your FCC authorization to operate it. FCC Notice This equipment has been tested and found to comply with the limits for a scanning receiver, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Limited Warranty RadioShack warrants this product against defects in materials and workmanship under normal use by the original purchaser for one (1) year after the date of purchase from a RadioShack-owned store or an authorized RadioShack franchisee or dealer. RADIOSHACK MAKES NO OTHER EXPRESS WARRANTIES. This warranty does not cover: (a) damage or failure caused by or attributable to abuse, misuse, failure to follow instructions, improper installation or maintenance, alteration, acci- dent, Acts of God (such as floods or lightning), or excess voltage or current; (b) improper or incorrectly performed repairs by persons who are not a RadioShack Authorized Service... - Page 35 Should a problem occur that is covered by this warranty, take the product and the RadioShack sales receipt as proof of purchase date to any RadioShack store in the U.S. RadioShack will, at its option, unless otherwise provided by law: (a) repair the product without charge for parts and labor; (b) replace the product with the same or a comparable product; or (c) refund the purchase price. All replaced parts and products, and products on which a refund is made, become the property of RadioShack. New or reconditioned parts and products may be used in the performance of warranty service. Repaired or replaced parts and products are warranted for the remainder of the original warranty period. You will be charged for repair or replacement of the product made after the expiration of the warranty period. RADIOSHACK EXPRESSLY DISCLAIMS ALL WARRANTIES AND CONDITIONS NOT STATED IN THIS LIMITED WARRANTY. ANY IMPLIED WARRANTIES THAT MAY BE IMPOSED BY LAW, INCLUDING THE IMPLIED WARRANTY OF MERCHANTABILITY AND, IF APPLICABLE, THE IMPLIED WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE, SHALL EXPIRE ON THE EXPIRATION OF THE STATED WARRANTY PERIOD. EXCEPT AS DESCRIBED ABOVE, RADIOSHACK SHALL HAVE NO LIABILITY OR RESPONSIBILITY TO THE PURCHASER OF THE PRODUCT OR ANY OTHER PERSON OR ENTITY WITH RESPECT TO ANY LIABILITY, LOSS OR DAMAGE CAUSED DIRECTLY OR INDIRECTLY BY USE OR PERFORMANCE OF THE PRODUCT OR ARISING OUT OF ANY BREACH OF THIS WARRANTY, INCLUDING, BUT NOT LIMITED TO, ANY DAMAGES RESULTING FROM INCONVENIENCE AND ANY LOSS OF TIME, DATA, PROPERTY, REVENUE, OR PROFIT AND ANY INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUEN- TIAL DAMAGES, EVEN IF RADIOSHACK HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. Some States do not allow limitations on how long an implied warranty lasts or the exclusion or limitation of incidental or consequential damages, so the above limitations or exclusions may not apply to you. This warranty gives you specific legal rights, and you may also have other rights which vary from State to State. You may contact RadioShack at: RadioShack Customer Relations 300 RadioShack Circle, Fort Worth, TX 76102 04/08...
- Page 36 Protect the environment by recyclying your used electronics. Go to E-CyclingCentral.com to find an electronic recycling center near you. 07A09 Printed in China ©2009. RadioShack Corporation. GR-09D-0910 All rights reserved. RadioShack and RadioShack.com are trademarks used by RadioShack Corporation. 20-405/PRO-405...