Radio Shack ADV0801 Owner's Manual page 10

ADV0801 Owner's Manual Draft
^ v Menu position and search direction indicators.
Understanding the Keypad
Your ADV0801 features an easy-to understand backlit keypad with 34 keys that are used to
control and program the radio.
Softkeys
F1, F2, F3 - activate function shown in the LCD display immediately above the softkey.
Five Way Pushbutton Pad
< > ^ v keys are used for navigation while browsing objects and menus. SEL key activates data
entry fields and toggles Scan List selection in object menus. FUNC SEL activates context
sensitive help in menus.
Numeric Keypad
Used for data entry of frequencies, talkgroup IDs and alphanumeric labels. Used while scanning,
1-9 and 0 toggle Scan Lists 1-10 on and off. FUNC 1-9 and 0 toggle Scan Lists 11-20 on and off.
Operation Keys
FUNC - activates alternate key functions. FUNC key operation is very intuitive - typically it
"amplifies" the keypress that follows it.
(RIGHT) - activates backlight, FUNC (RIGHT) locks keypad.
MAN - Places scanner in Manual Mode for monitoring single objects.
SCAN - Places scanner in Scan Mode for scanning enabled objects, FUNC SCAN launches
Signal Stalker II.
TUNE - Allows direct tuning of any valid frequency, FUNC TUNE loads the current or most
recently scanned frequency into TUNE.
SRCH - Dedicated Search mode for service and frequency searches.
ATT - Toggles Attenuator on and off, FUNC ATT toggles Global Attenuator mode.
PRI - Toggles the Priority setting for selected or active object, FUNC PRI toggles Priority Mode
on or off for the scanner.
FAV - Activates Favorites Scan Mode, FUNC FAV adds the current object to the Favorites Scan
List.
WX - Activates Weather scan, FUNC WX activates Skywarn mode.
PGM - Places scanner in Program Mode for editing radio-wide options, adding new objects or
editing existing objects, FUNC PGM accesses V-Scanner mode.
L/OUT - Toggles Temporary Lockout on active or selected object, FUNC L/OUT applies
permanent lockout (can be changed in the GLOB menu).
ENT - Enter key.
PSE - Pauses scan or search operation on active object.
Getting Started
Connecting the Antenna
Page 10