Radio Shack ADV0801 Owner's Manual page 57

ADV0801 Owner's Manual Draft
Exits if no key
is pressed
3. Press 1. The scanner displays
Factory Init
Erase Memory
ENTER if APPROVE
CLEAR to EXIT
4. Press ENT. The scanner displays
Initializing the
File System
Please Wait.....
Then,
File System
Initialized to
Defaults.
Press any key.
5. Press any key on the keypad to proceed. The scanner will next display:
GLOB EEPROM area
Initialized to
defaults.
Press any key.
6. Press any key on the keypad to proceed. The scanner will reboot with file system and global
parameters reset to factory defaults.
Detailed Menu Reference
Your ADV0801 scanner uses exclusive Object Oriented User Interface, which features a
powerful menu system that is used to configure the various Scannable Objects that your
scanner is capable of receiving. The ADV0801 design also includes a Global Settings (GLOB)
menu that provides unprecedented control over the radio wide settings used throughout your
scanner. This section of the manual provides detailed information about all of the menus and
menu parameters.
Each menu parameter features a Dflt softkey that can be used to restore the value to the factory
defaults. This can be very useful if you make a change to a parameter but do not like the result.
HINT: Remember that context sensitive help is available for every menu parameter. Press
FUNC SEL to view help for the selected parameter. Press SEL to exit help.
Page 57