Radio Shack ADV0801 Owner's Manual page 43

ADV0801 Owner's Manual Draft
NOTE: When a signal is being received, the Lmts softkey (F1) changes to FrL/O. You can access
the Lmts softkey by pressing FUNC F1 when the F1 key function is FrL/O.
Press the ^ or v keys on the 5-way pushbutton pad to change the search direction.
Press the MODE softkey to change the receive mode (AM, FM, NFM) from the default for the
current frequency range (au).
Press the FrL/O softkey to add a found frequency to the lockout list.
Press the STOR softkey to create a new CONV object using the found frequency.
Using dedicated SRVC mode
Your scanner's dedicated SRVC search modes provide you with the ability to instantly access
each of the scanner's service search ranges without creating a new SRVC object.
To activate dedicated SRVC search mode, press the SRCH key on the keypad repeatedly until
the desired service search is indicated on the display. The following service searches are
available:
Railroad - searches the Association of American Railroads (AAR) VHF railroad frequencies used
in the US and Canada
Public Safety (PubSafety) - Searches commonly used public safety frequencies. Groups are as
follows:
0: 33.4-46.5 MHz
1: 151-170 MHz
2: 453-467 MHz
3: 764-806 MHz
4: 851-869 MHz
Aircraft - Searches civilian and military air frequencies. Groups are as follows:
0: 108-118 MHz Navigation
1: 118-137 MHz Civilian Voice
2: 138-150 MHz Military Voice (excludes 2m Amateur)
3: 225-400 MHz Military Voice
Ham - Searches amateur radio frequencies. Groups are as follows:
0: 28.0-29.7 MHz
1: 50-54 MHz 6m Band
2: 144-148 MHz
3: 222-225 MHz
4: 420-450 MHz
5: 902-928 MHz
6: 1240-1300 MHz
VHF Low Band
VHF High Band
UHF Band
700 MHz Band
800 MHz Band
10m Band
2m Band
1.25cm Band
70cm Band
33cm Band
23cm Band
Page 43