Radio Shack ADV0801 Owner's Manual page 73

ADV0801 Owner's Manual Draft
LED Color
Latch LED
Backlight
Alarm
Fav
EXPERT BELOW
Modulation
Atten
Delay
Delay Time
0-7
Sets LED color to 0-7 as defined in the GLOB menu. By
default, 0=LED Off, 1=Red, 2=Yellow, 3=Green, 4=Cyan,
5=Blue, 6=Magenta, 7=White.
On or Off
Normally the ALERT LED is active only while the object is
receiving a transmission. When Latch is on, the ALERT
LED will remain lit after the transmission is complete,
unless overridden by a subsequent object that is also using
the ALERT LED.
On, Off or Flash
Controls whether the backlight should be on, off or
flashing while the object is active.
None, Chirp, Hi-Lo, Alert, Ring, 2-Chirp, Fast Hi-Lo, DTMF#
Sets the Audible Alarm for the SRVC object. When an
Audible Alarm is selected, the selected alarm will play
anytime the scanner stops for activity on the SRVC object
while scanning.
On or Off
When On, the SRVC object is a member of the Favorites
Scan List.
AM, FM, NFM, AU
Modulation setting for the SRVC search. In most cases AU
will work fine. Use AM to override and force AM
modulation, FM to force FM modulation, NFM to force
narrow FM modulation.
On or Off
When on, applies 20 dB of attenuation to all hits received
on the SRVC search. Useful in areas where interference
from nearby strong signals is present.
On or Off
Controls whether a Delay is used to wait for reply traffic
after a transmission on the SRVC search.
1-200
Sets the amount of time (in 100 millisecond intervals) for
the wait for reply delay if Delay is On, e.g., 20=2 seconds.
Page 73