Radio Shack ADV0801 Owner's Manual page 30

ADV0801 Owner's Manual Draft
By default, every new object you create is mapped to be a member of Scan List 01. Scan List
membership is defined in an object's parameters menu and is typically found at the beginning of
the menu.
To change Scan List membership when creating a new object, scroll up or down to the Scan
Lists: parameter in the object's menu before saving the object. With the Scan Lists: field
highlighted (as indicated by the blinking cursor), use the < > keys on the 5-way pushbutton pad
to scroll through the Scan Lists until you find the Scan List that you wish to enable or disable
membership for the object, and use the SEL button to toggle membership for that Scan List on
or off. The asterisk (*) next to the Scan List number indicates that the object is a member of
that Scan List. Press the Save softkey to save the modified object. Objects can be members of as
many Scan Lists as you see fit, without limitation to the number of Scan Lists an object is
mapped to, and without limitation to the number of objects that are mapped to a given Scan
List.
To change Scan List membership for an existing object, press the PGM key. Use the < > ^ v  k eys
on the 5-way pushbutton pad to scroll to the existing object that you wish to change, then press
the EDIT softkey. Press the CURR softkey to edit the current object.
NOTE: Remember, when browsing objects in Manual or Program Mode, the arrow keys on the
5-way pushbutton pad operate as follows:
^: navigates "up" through the objects assigned to the current Scan List
v: navigates "down" through the objects assigned to the current Scan List
<: navigates "up" through the active Scan Lists in the radio
>: navigates "down" through the active Scan Lists in the radio
Scroll down in the object's parameters menu to the Scan Lists: field. With the Scan Lists: field
highlighted, use the > on the 5-way pushbutton pad to scroll through the Scan Lists, and use
the SEL button to toggle membership for a Scan List on or off. The asterisk (*) next to the Scan
List number indicates that the object is a member of that Scan List. Press the Save softkey to
save the modified object.
Naming, enabling and disabling Scan Lists
By default, Scan Lists are named "Scan List 01 - Scan List 20". If desired, you can give your
Scan Lists names to describe their function. Press PGM, then press the GLOB softkey and scroll
down to the Scan Lists parameter. Press the SEL key to display the Scan Lists sub menu. Scroll
to the desired Scan List and press the > key to edit the settings for the selected Scan List, Scroll
to the Tag field and press the > key to edit the name. Press the Done softkey when finished,
then press the Save softkey to save the changes to the Scan List sub menu, then press the Save
softkey again to save the changes to the Global menu. Scan Lists may be enabled or disabled
while actively scanning, or by accessing the individual Scan List in the Global Settings (GLOB)
menu.
To toggle a Scan List's enabled/disabled status while scanning, press the numeric key that
corresponds with the Scan List you wish to toggle. For example, pressing 4 while scanning will
Page 30