Radio Shack ADV0801 Owner's Manual page 63

ADV0801 Owner's Manual Draft
Freq
Tag
Sq Mode
Squelch Code
L/Out
Priority
LED Mode
LED Color
Latch LED
membership. A "*" next to the Scan List number indicates
that the object is mapped to that Scan List.
Any supported frequency in MHz
The frequency that the CONV object will use.
Alpha-numeric text
The alphanumeric display name for the CONV channel.
Use the standard text entry method or QTXT to name the
object.
Search, None, CTCSS, DCS, P25
Sets subaudible squelch mode or Project 25 conventional
digital modulation. Use Search to automatically analyze
signals to determine squelch mode and code. Use None to
ignore subaudible squelch. Use CTCSS for tone coded
squelch, DCS for digital coded squelch, or P25 for Project
25 conventional digital operation. Used in conjunction
with Squelch Code parameter below.
CTCSS Hz, DCS Code, P25 NAC
Sets CTCSS tone, DCS code, or P25 NAC depending on Sq
Mode setting. Use Search to detect tone or code value for
selected squelch type.
On or Off
Permanent lockout for the CONV channel. Also accessed
by pressing FUNC L/OUT while the scanner is stopped on
the CONV object.
On or Off
Turns Priority Mode on or off for the CONV object.
Solid or Flash
Controls whether the ALERT LED flashes or remains on
solid when the ALERT LED is used.
0-7
Sets LED color to 0-7 as defined in the GLOB menu. By
default, 0=LED Off, 1=Red, 2=Yellow, 3=Green, 4=Cyan,
5=Blue, 6=Magenta, 7=White.
On or Off
Normally the ALERT LED is active only while the object is
receiving a transmission. When Latch is on, the ALERT
LED will remain lit after the transmission is complete,
unless overridden by a subsequent object that is also
using the ALERT LED.
Page 63