Radio Shack ADV0801 Owner's Manual page 46

ADV0801 Owner's Manual Draft
Your scanner also allows you to specify the event code. The default alert code is "***", which is
best for most general purpose weather alert monitoring purposes. A list of event codes can be
found at this web site:
http://www.weather.gov/os/eas_codes.shtml
Each SAME location/event code storage location can be configured for Entry ON/OFF and
Lockout ON/OFF.
When a SAME location/event code storage location is set for Entry ON, the radio will process
the SAME location/event code that is stored there. When a SAME location/event code storage
location is set for Entry OFF, that SAME location and event code will be ignored.
When a SAME location/event code storage location is set for Entry ON and Lockout ON, the
radio will process the SAME location/event code that is stored there, and will lock out the
specified event code. A SAME location/event code storage location set for Entry: OFF and
Lockout: ON will not be processed, because Entry is set to OFF. In case of a conflict (i.e., two
identical codes and events are entered, and one is locked out), the locked out entry will take
precedence.
SAME Entry Examples
Using the Dallas County, TX example above:
SAME Entry 1:
Code: 048113
Event: ***
Entry: ON
Lockout: OFF
SAME Entries 2-10:
Code: ******
Event: ***
Entry: OFF
Lockout: OFF
The above entry for 048113 will receive all SAME messages for 048113.
SAME Entry 1:
Code: 048113
Event: ***
Entry: ON
Lockout: OFF
SAME Entry 2:
Code: 048113
Event: RWT
Entry: ON
Page 46