Radio Shack ADV0801 Owner's Manual page 61

ADV0801 Owner's Manual Draft
Color 0-7
Qtxt1-0
Key Repeat
LCD BlinkOff
LCD BlinkOn
LED BlinkOff
LED BlinkOn
Pri Channels
Pri Interval
TGRP Pri Int
QuickPriRtn
Search Delay
Red/Green/ Blue (RGB) value
Sets intensity of red, green and blue LEDs. Press SEL to
edit colors. Use < > keys to scroll to R, G or B LED
settings. Use numeric keys to activate preset intensity
levels for each LED, or use ^ v keys to fine scroll intensity.
Text value
Sets QTXT (QuickText) 0-9 text. Use "$" to indicate end of
text.
On or Off
Toggles key repeat mode when a key is held down
1-250 x 10 mS
For alternating text displays, sets the display time for the
secondary display element.
1-250 x 10 mS
For alternating text displays, sets the display time for the
primary display element.
1-250 x 10 mS
When the ALERT LED setting for an object is set to Flash,
this is the amount of time the LED stays turned off.
1-250 x 10 mS
When the ALERT LED setting for an object is set to Flash,
this is the amount of time the LED stays turned on.
0-250
Number of priority CONV channels to check during a
priority scan sampling. "0" samples all CONV priority
channels.
2-100 x 100 mS
Conventional frequency priority sample interval.
On or Off
Toggles priority interrupt scanning during trunked calls
On or Off
When on, does not wait for verification of correct CTCSS,
DCS or NAC when returning to an active CONV channel
after priority sampling
1-100 x 100 mS
Sets wait for reply delay for all search modes
Page 61