Radio Shack ADV0801 Owner's Manual page 37

ADV0801 Owner's Manual Draft
the TSYS object to optimize Multi-site Roam performance.
LTR Home Repeater AutoMove
LTR Home Repeater AutoMove takes the guesswork out of programming LTR trunking systems
when the home repeater order is not known.
By default, LTR Home Repeater AutoMove is turned off and is controlled in the individual TSYS
objects. To enable LTR Home Repeater Automove, access the menu for the desired TSYS, then
scroll down to the last item in the menu, AutoMove HRs. Use the < > keys to toggle AutoMove
HRs on or off for the selected TSYS, then press the Save softkey to save your changes.
When AutoMove HRs is turned on, you may enter the LTR system frequencies in any order, and
the ADV0801 will automatically move the frequencies to the proper home repeater slots as
transmissions are received on the system.
Priority Scan
Your ADV0801 scanner features Priority Scan operation for CONV and TGRP objects. When
Priority Scan is active, increased priority is given to objects that have their Priority mode set to
ON.
Turning Object Priority On or Off
Priority for CONV and TGRP objects can be toggled on or off using the following methods:
Press the PRI key when the scanner stops on the object while it is active. The plD indicator in
the object display will show p for Object Priority Off, and P for Object Priority On.
Browse to an object in Manual Mode or PGM mode, then press the PRI key to toggle Object
Priority on or off. The plD indicator in the object display will show p for Object Priority Off, and
P for Object Priority On.
Browse to an object in PGM mode. Press the EDIT, then CURR softkeys. Use the v key to scroll
to the Priority setting. Use the < or > keys to toggle Priority On or Off.
When creating a new object, before saving the object scroll to the Priority setting. Use the < or >
keys to toggle Priority On or Off.
Turning Priority Scan Mode On or Off
While the radio is scanning, press FUNC, then PRI to toggle Priority Scan On or Off. Priority
Scan status is shown in the man Scanning status display. PRI indicates that Priority Scan mode
is on, and pri indicates that Priority Scan mode is off.
CONV Priority Scan
When Object Priority is set to Yes for one or more CONV objects, the scanner will sample the
Page 37