Updating The Firmware - Siemens SIMATIC Ident RF1000 Configuration Manual

Updating the firmware

Requirements
• The Uploader has been installed on your computer.
• An RF1000 reader that you can connect to your computer.
• An update file in "*.bf2" file format
Updating the firmware
Follow these steps to perform a firmware update of the reader:
1. Open the Uploader by double-clicking the "bf2uploader.exe" file.
2. Click on the "Browse" button on the top right and select the desired configuration file
("*.bf2").
3. Connect the reader to your computer.
4. Click the "Select Reader" button.
5. Select the desired reader in the list and click "Select".
If multiple interfaces are displayed in the list, select the "HID" entry.
6. Click the "Start Update" button.
Result: The firmware update is performed. As soon as the update has been completed, the
reader automatically performs a restart and the reader information is updated.
SIMATIC RF1000
Configuration Manual, 07/2021, C79000-G8976-C647-01
7
33