The "Settings - General" Menu Item - Siemens SIMATIC RF185C Operating Instructions Manual

7.3.2

The "Settings - General" menu item

The "Settings - General" menu item is divided into the following area:
• Log settings
• Logbook settings
Figure 7-4 The "Settings - General" menu item
Log settings
In the "Log settings" area, you can use the check boxes to decide which events are entered in
the log. The logbook is structured as a ring buffer. Bear in mind that with a high degree of
detail of the data, the ring buffer fills up more quickly, which can have a negative effect on
the performance of the device.
Table 7- 4
Parameter
General
COMMON
ERRORS
EVENTS
COMMANDS
Additional information
Return value
Call parameters
Status telegrams
SIMATIC RF185C, RF186C, RF188C, RF186CI, RF188CI
Operating Instructions, 03/2022, C79000-G8976-C512-04
Description of the parameters of the log
Description
Messages relating to general events:
e.g. reader startup, login to the WBM, ...
Errors and alarm messages of the communications module
Recording of all tag events
Commands of the user application
Return values for the commands of the user application and for the written or
read transponder data.
Call parameters for the commands of the user application
Recording of the status frames for PLC communications. Can be switched off if
the status frames are used as line monitoring. In this way, the logbook is kept
free for user data.
Configuring with the WBM
7.3 The menu items of the WBM
73