Ktm Powerpack, Battery Charger 17; Removing The Ktm Powerpack - KTM Freeride E-XC NG 2018 Owner's Manual

17.1

Removing the KTM PowerPack

Warning
Risk of injury There is a risk of electric shock when working on high-voltage components.
Work on high-voltage components require special training, qualifications and tools.
–
Work which has not been described and explained may only be performed by correspondingly trained
KTM specialists. (Your authorized KTM workshop will be glad to help.)
–
Do not open the electric motor or the KTM PowerPack. (Your authorized KTM workshop will be glad to
help.)
Warning
Environmental hazard A lithium-ion battery (KTM PowerPack) contains components and elements that are
harmful to the environment.
–
Never throw a KTM PowerPack into the household trash.
–
Dispose of the KTM PowerPack properly and in compliance with the applicable regulations. (Your
authorized KTM workshop will be glad to help.)

KTM POWERPACK, BATTERY CHARGER 17

Preparatory work
–
Deactivate the vehicle. (
–
Fold the seat up. (
Main work
–
Loosen screws
Note
Material damage Components damaged or destroyed by water
or dirt.
–
Mount the covering cap if you have removed the
KTM PowerPack.
–
Place the KTM PowerPack on a clean and dry surface.
–
Remove KTM PowerPack
Lifting strap (70029022000)
Info
The KTM PowerPack is very heavy. A second person
can help with removal.
402145-11
Finishing work
–
Mount the covering cap. (
p. 43)
p. 69)
1
.
2 .
p. 71)
107