10 Riding Instructions; Checks And Maintenance Measures When Preparing For Use; Starting The Vehicle - KTM Freeride E-XC NG 2018 Owner's Manual

10 RIDING INSTRUCTIONS

10.1
–
Check the throttle grip, main switch, KTM PowerPack, multifunction display, and electric motor for external
damage.
–
Check the electrical system.
–
Check the front brake fluid level. (
–
Check the rear brake fluid level. (
–
Check the front brake linings. (
–
Check the rear brake linings. (
–
Check that the brake system is functioning properly.
–
Check the coolant level. (
–
Check for chain dirt accumulation. (
–
Check the chain, rear sprocket, motor sprocket, and chain guide. (
–
Check the chain tension. (
–
Check the tire condition. (
–
Check the tire air pressure. (
–
Check the spoke tension. (
–
Clean the dust boots of the fork legs. (
–
Bleed the fork legs. (
–
Check the settings of all controls and ensure that they can be operated smoothly.
–
Check all screws, nuts, and hose clamps for a tight fit.
–
Check the charge level of the KTM PowerPack.
10.2
40

Checks and maintenance measures when preparing for use

Info
Before every trip, check the condition of the vehicle and ensure that it is safe to operate.
The vehicle must be in perfect technical condition when it is being operated.
p. 118)
p. 73)
p. 95)
p. 95)
p. 96)
Info
The spoke tension must be checked regularly as incorrect spoke tension will strongly impair riding
safety.
p. 58)

Starting the vehicle

401944-10
p. 80)
p. 86)
p. 82)
p. 88)
p. 72)
p. 59)
–
Take the motorcycle off side stand
stand with rubber band
–
Turn the key in the ignition lock to the position
p. 75)
1
and secure the side
2
.
.