Checking The Coolant Level - KTM Freeride E-XC NG 2018 Owner's Manual

18 COOLING SYSTEM
18.3
118
400243-10

Checking the coolant level

Warning
Danger of scalding During motorcycle operation, the coolant gets very hot and is under pressure.
–
Do not remove the radiator cap, radiator hoses or other cooling system components when the motor
is hot. Allow the motor and cooling system to cool down. In case of scalding, rinse immediately with
lukewarm water.
Warning
Danger of poisoning Coolant is toxic and a health hazard.
–
Keep coolant out of the reach of children.
–
Do not allow coolant to come into contact with the skin, the eyes and clothing.
–
Consult a doctor immediately if coolant is swallowed.
–
Rinse the affected area immediately with plenty of water in the event of contact with the skin.
–
Rinse eyes thoroughly with water and consult a doctor immediately if coolant gets into the eyes.
–
Change clothing if coolant spills onto your clothing.
400243-10
Main work
–
Remove the radiator cap.
–
Check the antifreeze in the coolant.
−25 ... −45 °C (−13 ... −49 °F)
» If the antifreeze in the coolant does not match the speci-
fied value:
–
Correct the antifreeze in the coolant.
–
Check the coolant level in the radiator.
A
Coolant level above the
radiator fins
» If the coolant level does not meet specifications:
–
Correct the coolant level.
Coolant ( p. 137)
–
Mount the radiator cap.
Finishing work
–
Remove the motorcycle from the lift stand. (
–
Install the KTM PowerPack. (
–
Lock the seat. ( p. 69)
Condition
The motor is cold.
–
Position the vehicle vertically on a level surface with the aid of
another person.
–
Remove the radiator cap.
–
Check the coolant level in the radiator.
A
Coolant level above the
radiator fins
» If the coolant level does not match the specified value:
–
Correct the coolant level.
10 mm (0.39 in)
p. 57)
p. 108)
10 mm (0.39 in)