13.29
Checking the chain, rear sprocket, motor sprocket, and chain guide
Preparatory work
–
Deactivate the vehicle. (
–
Fold the seat up. (
–
Remove the KTM PowerPack. (
–
Mount the covering cap. (
–
Raise the motorcycle with a lift stand. (
Main work
–
Check the rear sprocket and motor sprocket for wear.
»
If the rear sprocket and motor sprocket are worn:
–
Change the drivetrain kit.
400227-01
–
Pull at the top part of the chain with the specified weight
Guideline
Weight, chain wear measure-
ment
–
Measure the distance
section.
Info
Chain wear is not always even, so you should repeat
this measurement at different chain positions.
Maximum distance
the longest chain section
»
If distance
–
Change the drivetrain kit.
400987-10
SERVICE WORK ON THE CHASSIS 13
p. 43)
p. 69)
p. 107)
p. 71)
Info
The motor sprocket, rear sprocket, and chain
should always be replaced together.
10 ... 15 kg (22 ... 33 lb.)
B
of 18 chain links in the lower chain
272 mm (10.71 in)
B
at
B
is greater than the specified measurement:
Info
The motor sprocket, rear sprocket, and chain
should always be replaced together.
p. 57)
A
.
75