Changing The Combination Instrument - KTM Freeride E-XC NG 2018 Owner's Manual

16 ELECTRICAL SYSTEM
16.11
106

Changing the combination instrument

A00198-10
A00199-10
E01033-10
Preparatory work
–
Deactivate the vehicle. (
–
Fold the seat up. ( p. 69)
–
Remove the KTM PowerPack. (
–
Mount the covering cap. (
–
Remove the headlight mask with the headlight. (
Main work
–
Remove screws 1 .
–
Pull the combination instrument upward out of the holder.
–
Using a coin, turn protection cap
wise and remove it.
–
Remove combination instrument
–
Insert the new battery with the label facing outward.
Combination instrument battery (CR 2430) (
–
Check the O-ring of the protection cap for correct seating.
–
2
Position protection cap
using a coin.
–
Press any button on the combination instrument.
The combination instrument is activated.
–
Position the combination instrument in the holder.
–
Mount and tighten the screws with washers.
Finishing work
–
Install the headlight mask with the headlight. (
–
Install the KTM PowerPack. (
–
Lock the seat. ( p. 69)
–
Check the headlight setting. (
–
Adjust the combination instrument.
p. 43)
p. 107)
p. 71)
p. 101)
2
all the way counterclock-
3
.
p. 133)
and turn all the way clockwise
p. 102)
p. 108)
p. 105)