13 SERVICE WORK ON THE CHASSIS
13.11
64
A00184-11
A00187-10
A00183-11
Checking the play of the steering head
Warning
Danger of accidents Incorrect steering head bearing play impairs the handling characteristic and dam-
ages components.
–
Correct incorrect steering head bearing play immediately. (Your authorized KTM workshop will be glad
to help.)
–
8
Tighten screws
.
Guideline
Screw, top triple
clamp
–
Attach the brake line and wiring harness. Close holder
–
Position the brake caliper. Mount and tighten screws
the spacers.
Guideline
Screw, front
M8
brake caliper
–
Position the brake line, wiring harness, and clamp. Mount and
bl
tighten screws
.
–
Connect plug-in connector and mount the cable tie(s).
Finishing work
–
Install front fender. (
p. 67)
–
Install the headlight mask with the headlight. (
–
Install the front wheel.
–
Check that the cable and brake lines are routed correctly.
–
Check the play of the steering head.
–
Remove the motorcycle from the lift stand. (
–
Install the KTM PowerPack. (
–
Lock the seat. (
p. 69)
–
Check the headlight setting. (
M8
22 Nm (16.2 lbf ft)
bk
25 Nm (18.4 lbf ft)
Loctite
p. 102)
(
p. 91)
(
p. 64)
p. 57)
p. 108)
p. 105)
9
.
with
®
243™