20 SERVICE WORK ON THE MOTOR
20.1
122
Changing the gear oil
Warning
Danger of scalding Gear oil becomes very hot when the motorcycle is operating.
–
Wear suitable protective clothing and safety gloves.
–
If you have been scalded, hold the burn under lukewarm water immediately.
Warning
Environmental hazard Hazardous substances cause environmental damage.
–
Dispose of oils, grease, cleaning agents, brake fluid etc. properly and in compliance with the applica-
ble regulations.
Info
Drain the gear oil while the motor is warm.
C00745-10
C00748-10
C00746-10
Preparatory work
–
Stand the motorcycle on its side stand on a horizontal surface.
–
Deactivate the vehicle. (
–
Fold the seat up. (
p. 69)
–
Remove the KTM PowerPack. (
–
Mount the covering cap. (
Main work
–
Place a suitable container under the motor.
–
1
Remove oil drain plug
–
2
Remove screw plug
.
–
Let the gear oil drain fully.
–
Mount and tighten oil drain plug
Guideline
Oil drain plug with
magnet
–
Place the motorcycle on its left side with the aid of an assis-
tant.
p. 43)
p. 107)
p. 71)
.
1
.
M12x1.5x12
20 Nm (14.8 lbf ft)