17 Powerpack Hv, Battery Charger; Removing The Powerpack Hv - KTM Freeride E-XC 2021 Owner's Manual

17 POWERPACK HV, BATTERY CHARGER

17.1
108

Removing the Powerpack HV

Warning
Risk of injury There is a risk of electric shock when working on high-voltage components.
Work on high-voltage components requires special training, qualifications and tools.
–
Work which has not been described and explained may only be performed by appropriately trained
KTM specialists. (Your authorized KTM workshop will be glad to help.)
–
Do not open the electric motor or the Powerpack HV. (Your authorized KTM workshop will be glad to
help.)
Note
Environmental hazard A lithium-ion battery (Powerpack) contains components and elements that are
harmful to the environment.
–
Never throw a Powerpack into the household trash.
–
Dispose of the Powerpack properly and in compliance with the applicable regulations. (Your authorized
KTM workshop will be glad to help.)
402145-11
Preparatory work
–
Deactivate the vehicle. (
–
Fold the seat up. ( p. 69)
Main work
–
1
Loosen screws .
Note
Material damage Components damaged or destroyed by water
or dirt.
–
Mount the protection cap after you have removed the
Powerpack HV.
–
Place the Powerpack HV on a clean and dry surface.
–
2
Remove Powerpack HV
Lifting strap (70029022000)
Info
The Powerpack HV is very heavy. A second person can
help with removal.
Finishing work
–
Mount the protection cap. (
p. 43)
.
p. 71)