13 SERVICE WORK ON THE CHASSIS
13.10
62
A00204-10
A00205-10
A00206-10
Installing the lower triple clamp
H02564-10
Main work
–
1
Open holder
and detach the wiring harness and brake line.
–
2
Remove screw
.
–
3
Remove screw
.
–
Take off the upper triple clamp with the handlebar and set it
aside.
Info
Cover the components to protect them against damage.
Do not kink the cables and lines.
–
4
Remove O-ring
and protective ring
–
Take off the lower triple clamp with the steering stem.
–
Remove the upper steering head bearing.
Main work
–
Clean the bearing and sealing elements, check for damage,
and grease.
High viscosity grease (
–
Insert the lower triple clamp with the steering stem. Mount the
upper steering head bearing.
–
Check whether upper steering head seal
tioned.
–
Push protective ring
2
and O-ring
5
.
p. 139)
1
is correctly posi-
3
onto the steering stem.