Changing The Fuses Of Individual Power Consumers - KTM Freeride E-XC NG 2018 Owner's Manual

16 ELECTRICAL SYSTEM
16.4
100
A00134-10

Changing the fuses of individual power consumers

Info
The fuse box containing the fuses for the individual power consumers is located under the seat, behind
the 12-V battery.
C00921-10
Main work
–
Connect the battery charger to the battery. Switch on the bat-
tery charger.
Battery charger (58429074000)
Info
Never remove cover
In addition, this battery charger can be used to test the
open-circuit voltage. This battery charger also makes
overcharging the battery impossible.
–
Switch off the battery charger after charging. Disconnect the
battery from the battery charger.
Guideline
The charging current, charging voltage or charging time
must not be exceeded.
Recharge the battery regu-
larly when the motorcycle is
not being used:
Finishing work
–
Install the 12 V battery.
–
Lock the seat. ( p. 69)
Preparatory work
–
Deactivate the vehicle. (
–
Fold the seat up. ( p. 69)
–
Remove the KTM PowerPack. (
–
Mount the covering cap. (
Main work
–
1
Detach catches and open the fuse box cover.
1 .
3 months
( p. 98)
p. 43)
p. 107)
p. 71)