13 SERVICE WORK ON THE CHASSIS
13.7
60
Removing the fork legs
A00181-10
A00182-10
–
Clean and oil the dust boots and inner fork tubes of both fork
legs.
Universal oil spray (
p. 139)
–
Press the dust boots back into their normal position.
–
Remove excess oil.
Finishing work
–
Install the fork protector. (
–
Remove the motorcycle from the lift stand. (
–
Install the KTM PowerPack. (
–
Lock the seat. (
p. 69)
Preparatory work
–
Deactivate the vehicle. (
–
Fold the seat up. (
p. 69)
–
Remove the KTM PowerPack. (
–
Mount the covering cap. (
–
Raise the motorcycle with a lift stand. (
–
Remove the front wheel.
–
Remove the headlight mask with the headlight. (
Main work
–
1
Remove screws
and take off the clamp.
–
Remove the cable tie(s) and detach plug-in connector.
–
2
Remove screws
with the spacers and take off the brake
caliper.
–
Allow the brake caliper and brake line to hang loosely to the
side.
–
3
Loosen screws
. Take out the left fork leg.
–
4
Loosen screws
. Take out the right fork leg.
p. 59)
p. 57)
p. 108)
p. 43)
p. 107)
p. 71)
p. 57)
(
p. 91)
p. 101)