12.14
Handlebar position
12.15
Adjusting the handlebar position
Warning
Danger of accidents A repaired handlebar poses a safety risk.
If the handlebar is bent or straightened, the material becomes fatigued. The handlebar may break as a
result.
–
Change the handlebar if the handlebar is damaged or bent.
Info
Turn clockwise to increase damping; turn counterclock-
wise to reduce damping.
On the upper triple clamp, there are two holes at a distance of
to each other.
A
Hole distance
The holes on the handlebar supports are placed at a distance
B
of
from the center.
B
Hole distance
The handlebar supports can be mounted in four different posi-
tions.
H02563-10
Preparatory work
–
Deactivate the vehicle. (
–
Fold the seat up. (
–
Remove the KTM PowerPack. (
–
Mount the covering cap. (
TUNING THE CHASSIS 12
15 mm (0.59 in)
3.5 mm (0.138 in)
p. 43)
p. 69)
p. 107)
p. 71)
A
55