Table of Contents
Advertisement
Chapter 3 Getting Started with the Subsystem
3.1 Connecting the RAID Subsystem to the Host
This section describes how to connect the RAID subsystem to your host system.
NOTE: For optimum performance, use 4Gb FC Host Bus Adapter(s)
in the host computer(s).
1.
Connect the two power cables to the AC Power Inlets.
2.
Connect the Fibre Cable(s) to the Fibre Host Channel(s).
3.
Connect the remote management Ethernet cable to the Controller
Ethernet port.
4.
Turn on each power switch of the PSFM.
5.
Allow the machine a few moments to initialize before using it.
FIBRE-to-SAS/SATA RAID SUBSYSTEM
User Manual
53
Advertisement
Table of Contents
