Fantom Drives MGD-16FC16A User Manual page 128

FIBRE-to-SAS/SATA RAID SUBSYSTEM
e-mail settings, and enter in the "Password" and "Re-enter Password" test
boxes the password of the user who will authenticate the e-mail settings.
4. Select the type of alerts that will be sent via e-mail.
5. Click "Save" to apply the changes to the controller, or click "Save & Test" to apply
the changes to the controller and send a test message.
This screen contains the following details and options:
Field
Enable Tick the check box to enable SMTP.
Mail server where the SMTP account was created. The server name
SMTP Server IP can be used if a valid Primary DNS or Alternate DNS is entered in the
IP Connection screen.
The Domain of the mail server where the SMTP account was created.
SMTP Server
The server name can be used if a valid Primary DNS or Alternate
Domain
DNS is entered in the 'Ethernet Configuration' screen.
E-mail address of the system sending the e-mail, i.e. the e-mail
Sender
address assigned to the account used to administer the application.
Recipient 1 E-mail address of the first person receiving the e-mail.
Recipient 2 E-mail address of a second person receiving the e-mail.
Subject Text that will be displayed in the subject field of an Alert e-mail.
The mail server may require SMTP authentication. It is used as a
security mechanism to prevent members of an ISP from spamming
Enable
mailboxes on the network. If the check box is selected then this
Authentication
option is enabled and a user name and password are required to
authenticate the SMTP configuration.
Authentication Enter the username of the user who will authenticate the e-mail
User settings.
Enter the password of the user who will authenticate the e-mail
Password
settings.
Re-enter Re-enter the password of the user who will authenticate the e-mail
Password settings.
Application
Alerts generated by the GUI will be sent via e-mail when they occur.
Alerts
Notification Information events in the Event Log will be sent via e-mail when
Alerts they occur.
Warning events in the Event Log will be sent via e-mail client when
Warning Alerts
they occur.
128 User Manual
Description