9.3 Ethernet Configuration
The Administration
change the IP connection settings of the system.
Steps to configure Ethernet:
1. On the Administration
system whether to use DHCP or not. If not, configure the IP Address, Net
Mask, Primary DNS, Alternate DNS, Gateway IP Address, and Domain as
necessary.
2. Click "Save" to save the IP connection information of the
selected controller. The screen can be updated with the "Refresh
Page" button.
Ethernet Configuration screen allows you to view and
Ethernet Configuration screen, configure the
FIBRE-to-SAS/SATA RAID SUBSYSTEM
User Manual
125