Table of Contents
Advertisement
9.5 SNMP Configuration
The Administration
alert notifications for the system.
Steps to setup SNMP Configuration:
1. On the Administration
check box to enable SNMP.
2. Enter the SNMP Client IP, SNMP Client Name, and select the type of alerts to be sent
via SNMP.
3. Click "Save" to apply the changes to the controller, or click "Save &
Test" to apply the changes to the controller and send a test message.
SNMP Configuration screen allows you to set up SNMP
SNMP Configuration screen, tick the "Enable"
FIBRE-to-SAS/SATA RAID SUBSYSTEM
User Manual
129
Advertisement
Table of Contents
